Study HIGH Quality 350-801 Free Study Guides and Exams Tutorials
Download Cisco 350-801 Exam Dumps to Pass Exam Easily
NEW QUESTION # 195
End users report bad video quality and voice choppiness on Cisco Collaboration endpoints. The engineer changed the device pool the users were in but did not correct the problem. Which action should be taken to troubleshoot this issue?
- A. Set the service parameter Use Video Bandwidth Pool for Immersive Video Calls to "false"
- B. Use direct IP address calls between two endpoints to troubleshoot call quality issues
- C. Check for duplex/speed mismatches between the network port settings of the system and network switch
- D. Restart the Cisco Location Bandwidth Manager service on the Cisco UCM publisher
Answer: A
Explanation:
Section: QoS
NEW QUESTION # 196
Which Webex Calling dial plan settings restrict a user from placing a particular outbound call type?
- A. Reject
- B. Restrict
- C. Transfer to Number
- D. Block
Answer: B
Explanation:
The Restrict setting in the Webex Calling dial plan prevents users from placing certain types of outbound calls. For example, you can use the Restrict setting to prevent users from making international calls or calls to premium-rate numbers.
The Block setting in the Webex Calling dial plan prevents users from placing any outbound calls. The Transfer to Number setting in the Webex Calling dial plan transfers all outbound calls to a specified number. The Reject setting in the Webex Calling dial plan rejects all outbound calls.
Here is a table summarizing the different dial plan settings and their effects:
Dial Plan Setting
Effect
Block
Prevents users from placing any outbound calls.
Transfer to Number
Transfers all outbound calls to a specified number.
Reject
Rejects all outbound calls.
Restrict
Prevents users from placing certain types of outbound calls.
NEW QUESTION # 197
Which Cisco Unified Communications Manager configuration is required for SIP MWI integrations?
- A. Select "Redirecting Diversion Header Delivery - Outbound" on the SIP trunk.
- B. Enable "Accept presence subscription" on the SIP Trunk Security Profile.
- C. Select "Redirecting Diversion Header Delivery - Inbound" on the SIP trunk.
- D. Enable "Accept unsolicited notification" on the SIP Trunk Security Profile.
Answer: C
Explanation:
Section: Collaboration Applications
Explanation
NEW QUESTION # 198
Given this H.323 gateway configuration and using cisco best practices, how must the called party transformation pattern to ensure that a proper ISDN type of number is set?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: D
NEW QUESTION # 199
Which two steps should be taken to provision after the Self-Provisioning feature was configured for end users?
- A. Enter settings menu on the phone and press *,*,# (star, star, pound).
- B. Plug the phone into the network.
- C. Dial the self-provisioning IVR extension and associate the phone to an end user.
- D. Ask the Cisco UCM administrator to associate the phone to an end user.
- E. Dial the hunt pilot extension and associate the phone to an end user.
Answer: B,C
Explanation:
Self-Provisioning Phones:
When the feature is configured,you can provision a phone by doing the following:
* Plug the phone into the network.
* Dial the self-provisioning IVR extension.
* Follow the prompts to configure the phone,and associate the phone to an end user. Depending on how you have configured self-provisioning,the end user may to enter the user password,PIN, or an administrative authentication code.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_ b_system-configuration-guide-1201/cucm_b_system-configuration-guide-
1201_chapter_01001000.pdf
NEW QUESTION # 200
When a user dials a number with a phone that is registered to the Cisco Unified Communications Manager, what is the default timeout before the number is sent?
- A. 10 seconds
- B. 15 seconds
- C. 3 seconds
- D. 5 seconds
Answer: B
NEW QUESTION # 201
Which statement describes the outcome when the trust boundary is defined at the Cisco IP phone?
- A. Packets or Ethernet frames are remarked at the distribution layer switch.
- B. Packets or Ethernet frames are not remarked by the IP phone.
- C. Packets or Ethernet frames are remarked at the access layer switch.
- D. Packets or Ethernet frames are not remarked at the access layer switch.
Answer: D
Explanation:
Section: QoS
Explanation/Reference: https://networklessons.com/quality-of-service/how-to-configure-qos-trust-boundary-on-cisco- switches
NEW QUESTION # 202
Refer to the exhibit.
A call to an international number has failed. Which action corrects this problem?
- A. Strip the leading 011 from the called party number
- B. Add the bearer-cap speech command to the voice port.
- C. Assign a transcoder to the MRGL of the gateway.
- D. Add the isdn switch-type primart-dms100 command to the serial interface.
Answer: A
NEW QUESTION # 203
A collaboration engineer adds a voice gateway to Cisco UCM. The engineer creates a new gateway device in Cisco UCM, selects VG320 as the device type and selects MGCP as the protocol. What must be done next to add the gateway to the Cisco UCM database?
- A. Select a device pool for the new gateway
- B. Add the FQDN or hostname of the device
- C. Select the DTMF relay type for the gateway
- D. Configure the module in slot 0 of the new gateway
Answer: B
Explanation:
The below is an actual configuration example confirming the answer above which doesn't require the module to be configured for the VGW to be saved on CUCM:
NEW QUESTION # 204
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.
Answer:
Explanation:
NEW QUESTION # 205
After an engineer implements the FAC and CMC features together, users report that calls take almost one minute to complete and that they occasionally hear the reorder tone Which two actions address this issue? (Choose two.)
- A. Advise the user to press the "#" button after dialling the FAC and CMC codes
- B. Adjust the T302 timer from the default of 15 seconds to 5 seconds to shorten the interdigit timer
- C. Do not wait for the tones immediately dial the FAC and CMC
- D. Change the code if the problem persists i/i-Advise the user to hang up and try again
Answer: A,B
NEW QUESTION # 206
What are the last two bits of a DS field in DiffServe Byte used for?
- A. AFxy
- B. ECN
- C. INC
- D. RMI
Answer: B
NEW QUESTION # 207
Refer to the exhibit.
There is a call flow between Phone A and Phone B Phone B (holder) places Phone A (holder) on hold Which MRGL and Audio Source are played to Phone A?
- A. MRGL A and Audio Source 4
- B. MRGL B and Audio Source 2
- C. MRGL B and Audio Source 4
- D. MRGL A and Audio Source 2
Answer: B
NEW QUESTION # 208
A DTMF mismatch is occurring between an MGCP gateway registered FXS port and a Cisco Unified Communications Manager SIP trunk. Which media resource can be leveraged to interwork this mismatch?
- A. Trusted Relay Point
- B. Annunciator
- C. Conference Bridge
- D. Media Termination Point
Answer: D
Explanation:
Section: Cisco IOS XE Gateway and Media Resources
NEW QUESTION # 209
Refer to the exhibit.
The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?
- A. The translation rule is not matched because DNIS contains "-".
- B. The translation rule is matched and the translated number is 025553431234.
- C. The translation rule is matched and the translated number is 02553431234.
- D. The translation rule is not matched because DNIS does not end with a "$".
Answer: C
NEW QUESTION # 210
Refer to the exhibit.
An engineer configures a VoIP dial peer on a Cisco gateway Which codec is used?
- A. No codec is used (missing codec command).
- B. G.711alaw
- C. G.729r8
- D. G.711ulaw
Answer: C
NEW QUESTION # 211
......
Get 100% Real Free CCNP Collaboration 350-801 Sample Questions: https://dumpstorrent.dumpsfree.com/350-801-valid-exam.html