[Nov-2021 Newly Released] C1000-026 Dumps for IBM Security Certified
Updated Verified C1000-026 dumps Q&As - 100% Pass
NEW QUESTION 27
Which log should be reviewed to determine the reasons a patch installer did not proceed during a QRadar upgrade?
- A. /var/log/upgrade.log
- B. /var/log/setup-*/patches.log
- C. /var/log/qradar.log
- D. /var/log/qradar.audit
Answer: B
Explanation:
Reference:
https://www.ibm.com/support/pages/qradar-unable-run-patch-installer-and-update-exits-screenterminating- message
NEW QUESTION 28
An administrator has been asked to configure a new QRadar console high availability (HA) deployment. Both the primary and secondary consoles have been installed with the QRadar software.
What should the administrator do to complete the HA configuration?
- A. Reinstall the QRadar software on the secondary console using an "HA Recovery Setup".
- B. Select "Secondary Host" on the wizard when adding the secondary host to the deployment.
- C. Add the secondary console to the deployment, and then create the HA host.
- D. Create the HA host to add the secondary console to the deployment.
Answer: C
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/SS42VS_7.3.1/com.ibm.qradar.doc/ b_qradar_ha_guide.pdf
NEW QUESTION 29
An administrator needs to import data into QRadar for a specific use case.
The data that has been provided to the administrator is stored in records that map a key to a value.
Which type of data collection must the administrator create?
- A. Reference map of sets
- B. Reference set
- C. Reference map of maps
- D. Reference map
Answer: A
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/ t_qradar_conifig_rul_resp_reference_set.html
NEW QUESTION 30
A QRadar administrator added High Availability (HA) to the Event Processor and needs to verify the crossover link status between the primary and secondary hosts.
Which commands can be used to verify the crossover status? (Choose two.)
- A. /opt/qradar/ha/bin/getStatus crossover
- B. /opt/qradar/ha/bin/ha_getstate.sh
- C. /opt/qradar/ha/bin/ha cstate
- D. cat /proc/drbd
- E. /opt/qradar/ha/bin/qradar_nettune.pl linkaggr <interface> status
- F. /opt/qradar/ha/bin/qradar_nettune.pl crossover status
Answer: C,F
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-verifying-ha-crossover-connections-qradarnettunepl
NEW QUESTION 31
When troubleshooting issues with QRadar applications, which application Docker container log file can be used to get more information about the apps?
- A. /var/log/qradar.error
- B. /store/log/app.log
- C. /var/log/app.log
- D. /var/log/qradar.log
Answer: B
NEW QUESTION 32
An administrator has been asked to configure a new QRadar console high availability (HA) deployment. Both the primary and secondary consoles have been installed with the QRadar software.
What should the administrator do to complete the HA configuration?
- A. Reinstall the QRadar software on the secondary console using an "HA Recovery Setup".
- B. Select "Secondary Host" on the wizard when adding the secondary host to the deployment.
- C. Add the secondary console to the deployment, and then create the HA host.
- D. Create the HA host to add the secondary console to the deployment.
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/SS42VS_7.3.1/com.ibm.qradar.doc/ b_qradar_ha_guide.pdf
NEW QUESTION 33
An administrator enters the QRadar web console into a web browser but does not get a response.
Which process is responsible for the QRadar GUI?
- A. consoled
- B. guid
- C. tomcat
- D. magistrated
Answer: C
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-core-services-and-impact-when-restarted
NEW QUESTION 34
An administrator needs to import data into QRadar for a specific use case.
The data that has been provided to the administrator is stored in records that map a key to a value.
Which type of data collection must the administrator create?
- A. Reference set
- B. Reference map of maps
- C. Reference map
- D. Reference map of sets
Answer: C
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/ t_qradar_conifig_rul_resp_reference_set.html
NEW QUESTION 35
An administrator would like to add a new managed host which uses an existing Network Address Translation (NAT).
Which parameters have to be provided if "Host is NATed" is chosen while adding a managed host?
- A. Select Network Attached Telemetric, Enter MAC address of the server or appliance to add
- B. Select Network Attached Telemetric, Enter public IP of the server or appliance to add
- C. Select NATed network, Enter public IP of the server or appliance to add
- D. Select NATed network, Enter MAC address of the server or appliance to add
Answer: C
Explanation:
Reference:
https://www.google.com/url?
sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=2ahUKEwihsu3Li5XmAhVYwAIHHeCLDtoQFjAAegQIBhAC &url=https%3A%2F%2Fwww.ibm.com%2Fdeveloperworks%2Fcommunity%2Fforums%2Fajax%2Fdownload
%2Fd5b20a5b-11bd-4a1d-b294-08ec138eb0e1%2F9d086dd8-eee9-4cbd-912d-26059ffdd0ca%
2FQRadar_721_AdminGuide.pdf&usg=AOvVaw1GO4OmOjWV7uiyCLrdE0FV
NEW QUESTION 36
A QRadar upgrade is planned and a maintenance window is scheduled. The administrator must stage the FIXPACK from IBM Fix Central.
Which QRadar FIXPACK file type must the administrator download?
- A. XFS
- B. SFS
- C. RPM
- D. IMG
Answer: B
Explanation:
Explanation/Reference: https://www-945.ibm.com/support/fixcentral/swg/selectFixes?parent=IBM%
20Security&product=ibm/Other+software/IBM+QRadar+Network
+Insights&release=7.3.0&platform=Linux&function=all
NEW QUESTION 37
Which IBM monitoring application can be used to see detailed health and status information at the application, middleware, and system level?
- A. QRadar Operations App
- B. QRadar Assistant App
- C. QRadar Advisor With Watson App
- D. QRadar Deployment Intelligence App
Answer: D
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SSKMKU/com.ibm.QDIapp.doc/ c_qapps_QDI_intro.html
NEW QUESTION 38
What is a reason for restarting hostcontext service in QRadar?
- A. A new app was installed
- B. A new network hierarchy was uploaded
- C. The host is not responding to deploy requests
- D. A new user was created and it needs to be replicated
Answer: C
Explanation:
Reference:
https://www.ibm.com/support/pages/qradar-restarting-hostcontext-q-switch
NEW QUESTION 39
An administrator needs to develop advanced filters to retrieve information from the QRadar System pertaining to the top abnormal events of the most bandwidth-intensive IP addresses.
How can the administrator do this?
- A. Combine GROUP BY and ORDER BY clauses in a single query
- B. Build an AQL query using the QRadar Scratchpad
- C. Use the IBM DataStudio to create the query
- D. Build an AQL query using the QRadar GUI using Assets > Search Filter
Answer: A
Explanation:
Reference:
b_qradar_aql.pdf (21)
NEW QUESTION 40
When an administrator attempts to edit a log source after upgrading QRadar, a Device Support Module (DSM), a protocol, or Vulnerability Information Services (VIS) components, the following error message appears.
An error has occurred. Refresh your browser (press F5) and attempt the action again. If the problem persists, please contact customer support for assistance.
What action should the administrator take to troubleshoot this issue? (Choose two.)
- A. systemctl restart httpd
- B. systemctl start tomcat
- C. systemctl restart ecs-ep
- D. systemctl restart snmpd
- E. Clear browser cache
- F. systemctl restart iptables
Answer: B,E
Explanation:
Reference:
t_QRadar_Troubleshooting_guide_PurgeFiles.html
NEW QUESTION 41
An administrator needs to import a list of HR staff logins into a reference set.
Which file type can be used with the import function in the reference set editor window?
- A. xls
- B. csv
- C. json
- D. xml
Answer: B
Explanation:
Reference:
c_qradar_adm_refdata_ui.html
NEW QUESTION 42
An administrator needs to save the nightly QRadar backups on a network storage.
The administrator has established the connection to the network storage.
What should the administrator do next?
- A. Configure the new network storage using the Assets Manager
- B. Change the Backup Repository Path to the network storage location using the System Settings window.
- C. Change the Backup Repository Path to the network storage location using the Backup Recovery Configuration window.
- D. Change the Backup Repository Path by adding a new Network Activity Rule.
Answer: C
Explanation:
Explanation/Reference: http://ftpmirror.your.org/pub/misc/ftp.software.ibm.com/software/security/products/qradar/ documents/7.2.8/en/b_qradar_admin_guide.pdf (146)
NEW QUESTION 43
Which log should be reviewed to determine the reasons a patch installer did not proceed during a QRadar upgrade?
- A. /var/log/upgrade.log
- B. /var/log/setup-*/patches.log
- C. /var/log/qradar.log
- D. /var/log/qradar.audit
Answer: B
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-unable-run-patch-installer-and-update-exits-screen- terminating-message
NEW QUESTION 44
A company has several appliances and the administrator needs to copy a file to all appliances to run some tests to verify the integrity of the processes. The /opt/qradar/support/all_servers.sh script can be used to issue commands to all QRadar appliances within the deployment.
What option must be used with the script to copy the file to all appliances in the deployment?
- A. /opt/qradar/support/all_servers.sh -g
- B. /opt/qradar/support/all_servers.sh -C
- C. /opt/qradar/support/all_servers.sh -p
- D. /opt/qradar/support/all_servers.sh -k
Answer: C
Explanation:
Reference:
https://www-01.ibm.com/support/docview.wss?uid=swg21998517
NEW QUESTION 45
An administrator has to change the system hardware clock of the QRadar server. The administrator has already restarted the main services (hostservices, tomcat, hostcontext) and needs to synchronize the QRadar Console time with the QRadar managed hosts.
Which command can the administrator use to accomplish this?
- A. /sbin/hwclock -systohc /opt/qradar/bin/time_sync.sh
- B. /opt/qradar/support/all_servers.sh service ntpd restart
- C. /opt/qradar/support/all_servers.sh /opt/qradar/bin/time_sync.sh
- D. /opt/qradar/support/all_servers.sh systemctl restart systemd-timedated.service
Answer: C
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-configuring-ntp-settings-qradar-appliance
NEW QUESTION 46
An administrator needs to add the following networks to a QRadar network hierarchy as a single Classless Inter-Domain Routin (CIDR) range:
192.168.64.0/24
192.168.65.0/24
192.168.66.0/24
192.168.67.0/24
What is the correct supernet for these subnets?
- A. Network 192.168.64.0 with subnet mask 255.255.255.0
- B. Network 192.168.66.0 with subnet mask 255.255.252.0
- C. Network 192.168.64.0 with subnet mask 255.255.252.0
- D. Network 192.168.66.0 with subnet mask 255.255.252.0
Answer: C
NEW QUESTION 47
An administrator has reviewed the list of new features in the QRadar V7.3.2 release notes, and decides to upgrade their system to this version.
What is the minimum supported version that the administrator can upgrade from?
- A. 7.3.1
- B. 7.3.0
- C. 7.2.8
- D. 7.2.6
Answer: D
NEW QUESTION 48
......
Latest C1000-026 Exam Dumps IBM Exam from Training: https://dumpstorrent.dumpsfree.com/C1000-026-valid-exam.html