Latest May-2023 HPE6-A73 Dumps PDF And Certification Training
Check your preparation for HP HPE6-A73 On-Demand Exam
NEW QUESTION 43
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches withAOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies forboth wired and wireless traffic.
Which solution should the company implement?
- A. RADIUS dynamic authorization
- B. Downloadable user roles
- C. IPSec
- D. User-based tunneling
Answer: A
NEW QUESTION 44
A network engineer for a company with 012 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 1 second
- B. Once every 60 seconds
- C. Once every 5 seconds
- D. Once every 30 seconds
Answer: C
NEW QUESTION 45
The AOS-CX mobile app allows a network engineer or technician to perform which tasks? (Choose two.)
- A. Securely access the switch using SSH.
- B. Create a stack of AOS-CX switches.
- C. Transfer files between the switch and your mobile device.
- D. Use NetEdit to manage switch configuration.
- E. Schedule an operating system upgrade.
Answer: A,C
NEW QUESTION 46
Examine the attached diagram
Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?
- A. Server 1 and Server 2 can communicate with each other via the core layer.
- B. Server 2 can successfully access the core layer via the keepalive link.
- C. Server 1 can access the core layer via both uplinks.
- D. Server 2 cannot access the core layer.
Answer: C
NEW QUESTION 47
Examine the partial output of the BGP routing table of an AOS-CX switch:
The switch is learning about four possible path to reach the 1.0.0.0/8 network. Based on this output, which next-hop route will the AOS-CX select to be placed in the IP routing table?
- A. 192.168.1.5
- B. 192.168.3.5
- C. 192 1684 5
- D. 192.168.2.5
Answer: B
NEW QUESTION 48
What is correct regarding the configuration of ACLs on AOS-CX switches?
- A. Statements with the log keyword are always processed by the switch CPU.
- B. Standard ACLs are used to match on routes when performing route distribution.
- C. Wildcard masks are used to match on a range of IP addresses.
- D. Numbers 100 through 199 and 2000 through 2999 are used when creating extended ACLs.
Answer: C
NEW QUESTION 49
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
- A. Define the server group cppm
- B. Create and assign a local user role to the ports
- C. Enable change of authorization (CoA)
- D. Set the ports to client-mode
Answer: C
NEW QUESTION 50
What would prevent two OSPF routers from forming an adjacency? (Select two.)
- A. Different router IDs
- B. Different priorities
- C. Different MTU sizes
- D. Different IP addresses
- E. Different area types
Answer: B,D
NEW QUESTION 51
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any web-servers group web-ports
- B. access-list ip server 10 permit tcp any group web-servers group web-ports
- C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- D. access-list ip server 10 permit tcp any web-servers web-ports
Answer: A
NEW QUESTION 52
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
- A. IP traffic from 10 1 110/24 is allowed to access 10.1.110.0/24.
- B. IP traffic from 10 011 0/24 is allowed to access 10.112.0/24.
- C. Traffic from 10 0 12 0/24 will generate a log record when accessing 10.0.11.0/24.
- D. IP traffic from 10 1 12 0/24 is allowed to access 172.0.1.0/23.
Answer: B
NEW QUESTION 53
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
- A. Limits can be defined only for broadcast and multicast traffic
- B. Rate limiting and egress queue shaping can be applied globally
- C. Rate limiting and egress queue shaping can be used to restrict inbound traffic
- D. Only a traffic rate and burst size can be defined for a queue
Answer: D
Explanation:
you could apply egress queue shaping to the high priority queues to prevent starvation of low priority queues. Egress queue shaping allows you to apply a maximum bandwidth to a priority queue, as well as a burst size. The port buffers excess traffic up to the burst size and sends the buffered traffic at the max rate, smoothing out bursts while also preventing the high priority queue from exceeding its maximum rate and starving out lower priority queues.
NEW QUESTION 54
In AOS-CX switching, what determines when a frame is forwarded by the switch between the ingress and the egress port?
- A. Fabric Load Balancer
- B. Ingress port
- C. VSX switch tables
- D. Egress port
Answer: B
NEW QUESTION 55
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone's LAN port is connected to the switch.
Which statement is correct about this situation?
- A. The client-limit setting for port access needs to be changed
- B. Device fingerprinting is required for authentication
- C. 802.1X must be configured to work in fallback mode
- D. Device mode should be implemented
Answer: A
NEW QUESTION 56
Examine the AOS-CX configuration:
The switches have a default factory password setting NetEdit fails to access the configuration of the AOS-CX switches. What should the administrator do to solve this problem?
- A. Set a password for the default admin user account.
- B. Disable telnet globally.
- C. Use the default VRF instead of the mgmt VRF
- D. Enable IP routing globally
Answer: D
NEW QUESTION 57
What is correct regarding multicasting and AOS-CX switches?
- A. IGMP snooping is disabled, by default on Layer-2 VLAN interfaces
- B. IGMP snooping is enabled by default , on Layer-3 VLAN interfaces
- C. IGMP-enabled AOS-CX switches flood unknown multicast destinations.
- D. IGMP query- functions are enabled by default , on Layer-2 VLAN interfaces
Answer: A
NEW QUESTION 58
......
Valid HPE6-A73 Dumps for Helping Passing HP Exam: https://dumpstorrent.dumpsfree.com/HPE6-A73-valid-exam.html