Latest Jan-2024 300-710 Dumps PDF And Certification Training
Check your preparation for Cisco 300-710 On-Demand Exam
Cisco 300-710 certification exam is an excellent opportunity for network security professionals seeking to specialize in securing networks with Cisco Firepower. Securing Networks with Cisco Firepower certification validates the skills and knowledge required to deploy, configure, and manage Cisco Firepower technologies, including intrusion prevention, URL filtering, and network-based malware protection. The CCNP Security certification is recognized globally and is highly valued by employers seeking to hire experienced network security professionals.
NEW QUESTION # 128
A security engineer needs to configure a network discovery policy on a Cisco FMC appliance and prevent excessive network discovery events from overloading the FMC database? Which action must be taken to accomplish this task?
- A. Change the network discovery method to TCP/SYN.
- B. Configure NetFlow exporters for monitored networks.
- C. Exclude load balancers and NAT devices in the policy.
- D. Monitor only the default IPv4 and IPv6 network ranges.
Answer: C
NEW QUESTION # 129
A company has many Cisco FTD devices managed by a Cisco FMC. The security model requires that access control rule logs be collected for analysis. The security engineer is concerned that the Cisco FMC will not be able to process the volume of logging that will be generated. Which configuration addresses this concern?
- A. Send Cisco FTD connection events and security events to a cluster of Cisco FMC devices for storage and analysis.
- B. Send Cisco FTD connection events and security events to Cisco FMC and configure it to forward logs to SIEM for storage and analysis.
- C. Send Cisco FTD connection events directly to a SIEM system and forward security events from Cisco FMC to the SIEM system for storage and analysis.
- D. Send Cisco FTD connection events and security events directly to SIEM system for storage and analysis.
Answer: B
NEW QUESTION # 130
An engineer is monitoring network traffic from their sales and product development departments, which are on two separate networks What must be configured in order to maintain data privacy for both departments?
- A. Use 802 1Q mime set Trunk interfaces with VLANs to maintain logical traffic separation
- B. Use a dedicated IPS inline set for each department to maintain traffic separation
- C. Use passive IDS ports for both departments
- D. Use one pair of inline set in TAP mode for both departments
Answer: A
NEW QUESTION # 131
In a Cisco AMP for Networks deployment, which disposition is returned if the cloud cannot be reached?
- A. unknown
- B. disconnected
- C. unavailable
- D. clean
Answer: C
NEW QUESTION # 132
What is the disadvantage of setting up a site-to-site VPN in a clustered-units environment?
- A. VPN connections must be re-established when a new master unit is elected.
- B. VPN connections can be re-established only if the failed master unit recovers.
- C. Only established VPN connections are maintained when a new master unit is elected.
- D. Smart License is required to maintain VPN connections simultaneously across all cluster units.
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/ftd-cluster-solution.html#concept_g32_yml_y2b
NEW QUESTION # 133
On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?
- A. TAP mode
- B. strict TCP enforcement
- C. propagate link state
- D. transparent inline mode
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/inline_sets_and_passive_interfaces_for_firepower_threat_defense.html
NEW QUESTION # 134
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
- A. virtual links
- B. SHA authentication to OSPF packets
- C. area boundary router type 1 LSA filtering
- D. MD5 authentication to OSPF packets
- E. OSPFv2 with IPv6 capabilities
Answer: A,D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/ospf_for_firepower_threat_defense.html
NEW QUESTION # 135
What is the advantage of having Cisco Firepower devices send events to Cisco Threat response via the security services exchange portal directly as opposed to using syslog?
- A. Firepower devices do not need to be connected to the internet.
- B. Supports all devices that are running supported versions of Firepower
- C. All types of Firepower devices are supported.
- D. An on-premises proxy server does not need to set up and maintained
Answer: C
NEW QUESTION # 136
Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address 10.0.0.10, and that has the registration key Cisco123?
- A. configure manager local Cisco123 10.0.0.10
- B. configure manager add Cisco123 10.0.0.10
- C. configure manager local 10.0.0.10 Cisco123
- D. configure manager add 10.0.0.10 Cisco123
Answer: D
NEW QUESTION # 137
An organization does not want to use the default Cisco Firepower block page when blocking HTTP traffic. The organization wants to include information about its policies and procedures to help educate the users whenever a block occurs. Which two steps must be taken to meet these requirements? (Choose two.)
- A. Change the HTTP response in the access control policy to custom.
- B. Create HTML code with the information for the policies and procedures.
- C. Write CSS code with the information for the policies and procedures.
- D. Edit the HTTP request handling in the access control policy to customized block.
- E. Modify the system-provided block page result using Python.
Answer: A,D
NEW QUESTION # 138
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 139
An engineer wants to perform a packet capture on the Cisco FTD to confirm that the host using IP address 192 168.100.100 has the MAC address of 0042 7734.103 to help troubleshoot a connectivity issue What is the correct tcpdump command syntax to ensure that the MAC address appears in the packet capture output?
- A. -w capture.pcap -s 1518 host 192.168.100.100 mac
- B. -w capture.pcap -s 1518 host 192.168.100.100 ether
- C. -nm src 192.168.100.100
- D. -ne src 192.168.100.100
Answer: D
NEW QUESTION # 140
Which command-line mode is supported from the Cisco FMC CLI?
- A. configuration
- B. user
- C. admin
- D. privileged
Answer: A
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/660/configuration/guide/fpmc-config- guide-v66/command_line_reference.pdf
NEW QUESTION # 141
An engineer must deploy a Cisco FTD device. Management wants to examine traffic without requiring network changes that will disrupt end users. Corporate security policy requires the separation of management traffic from data traffic and the use of SSH over Telnet for remote administration. How must the device be deployed to meet these requirements?
- A. in routed mode with a bridge virtual interface
- B. in transparent mode with a management Interface
- C. in transparent made with a data interface
- D. in routed mode with a diagnostic interface
Answer: B
Explanation:
Explanation
To deploy a Cisco FTD device that meets the requirements of the question, the engineer must use transparent mode with a management interface. Transparent mode is a firewall configuration in which the FTD device acts as a "bump in the wire" or a "stealth firewall" and is not seen as a router hop to connected devices. In transparent mode, the FTD device can examine traffic without requiring network changes that will disrupt end users, such as changing IP addresses or routing configurations1. A management interface is a dedicated interface that is used for managing the FTD device and separating management traffic from data traffic. A management interface can be configured to allow SSH access for remote administration, which is more secure than Telnet2.
The other options are incorrect because:
Routed mode is a firewall configuration in which the FTD device acts as a router and performs address translation and routing for connected networks. Routed mode requires network changes that may disrupt end users, such as changing IP addresses or routing configurations1. A diagnostic interface is a special interface that is used for troubleshooting and capturing traffic on the FTD device. A diagnostic interface does not separate management traffic from data traffic or allow SSH access for remote administration.
Transparent mode with a data interface does not meet the requirement of separating management traffic from data traffic. A data interface is a regular interface that is used for passing and inspecting traffic on the FTD device. A data interface does not allow SSH access for remote administration2.
Routed mode with a bridge virtual interface (BVI) does not meet the requirement of examining traffic without requiring network changes that will disrupt end users. A BVI is a logical interface that acts as a container for one or more physical or logical interfaces that belong to the same layer 2 broadcast domain. A BVI allows the FTD device to route between different bridge groups on the same security module/engine. However, routed mode still requires network changes that may disrupt end users, such as changing IP addresses or routing configurations.
NEW QUESTION # 142
Which two packet captures does the FTD LINA engine support? (Choose two.)
- A. dynamic firewall importing
- B. source IP
- C. Layer 7 network ID
- D. application ID
- E. protocol
Answer: B,E
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212474-working-with- firepower-threat-defense-f.html
NEW QUESTION # 143
......
Valid 300-710 Dumps for Helping Passing Cisco Exam: https://dumpstorrent.dumpsfree.com/300-710-valid-exam.html