
[2025] Use Valid MTCNA Exam - Actual Exam Question & Answer
Test Engine to Practice MTCNA Test Questions
To prepare for the MTCNA certification exam, candidates can attend a MikroTik training course or use online resources such as videos, tutorials, and study guides. MikroTik also provides a range of study materials on their website, including practice exams and sample questions. Many candidates find that hands-on experience with MikroTik equipment is the best way to prepare for the exam, and MikroTik provides virtual labs that allow candidates to practice configuring and managing MikroTik networks.
Passing the MTCNA certification exam requires adequate preparation and training. MikroTik offers MTCNA training courses that cover all the topics required for the exam. The training is delivered by certified trainers and covers hands-on lab sessions that help participants gain practical experience in configuring MikroTik routers. MikroTik Certified Network Associate Exam certification provides numerous benefits such as recognition of skills, enhanced credibility, and better job prospects.
The MTCNA exam covers topics such as the basics of networking, TCP/IP, routing, wireless networking, network security, and network management using RouterOS. MTCNA exam is designed to test the candidate's understanding of these topics and their ability to apply the knowledge to real-world scenarios. MTCNA exam consists of 60 multiple-choice questions and has a duration of 90 minutes.
NEW QUESTION # 32
To block communications between wireless clients connected to the same access point interface, you should set
- A. 'default-authentication=no' and 'default-forwarding=no'
- B. 'default-authentication=no'
- C. 'default-forwarding=no'
- D. 'max-station-count=1'
Answer: C
NEW QUESTION # 33
What does the firewall action "log" do?
- A. It blocks and logs the packet
- B. It adds a prefix to the packet and passes it through
- C. It logs the packet
- D. It logs and blocks the packet
Answer: C
NEW QUESTION # 34
Which firewall chain should you use to filter clients HTTP traffic going through the router?
- A. forward
- B. input
- C. prerouting
- D. output
Answer: A
NEW QUESTION # 35
Why is it useful to set a Radio Name on the radio interface?
- A. To identify a station in the Access List
- B. To identify a station in a list of connected clients
- C. To identify a station in Neighbor discovery
Answer: C
NEW QUESTION # 36
Action=redirect allows you to make
- A. Transparent DNS Cache
- B. Forward DNS to another device IP address
- C. Enable Local Service
- D. Transparent HTTP Proxy
Answer: A,D
NEW QUESTION # 37
Is ARP used in the IPv6 protocol?
- A. False
- B. True
Answer: A
NEW QUESTION # 38
Action=redirect applies to
- A. SRC-NAT rules
- B. DST-NAT rules
- C. Route rules
- D. Firewall Filter rules
Answer: B
NEW QUESTION # 39
The DoD model (also called the TCP/IP stack) has four layers. Which layer of the DoD model is equivalent to the Network layer of the OSI model?
- A. Application
- B. Network Access
- C. Internet
- D. Host-to-Host
Answer: C
NEW QUESTION # 40
A routing table has following entries:
0 dst-address=10.0.0.0/24 gateway=10.1.5.126
1 dst-address=10.1.5.0/24 gateway=10.1.1.1
2 dst-address=10.1.0.0/24 gateway=25.1.1.1
3 dst-address=10.1.5.0/25 gateway=10.1.1.2
Which gateway will be used for a packet with destination address 10.1.5.126?
- A. 10.1.1.1
- B. 10.1.5.126
- C. 25.1.1.1
- D. 10.1.1.2
Answer: D
NEW QUESTION # 41
Which firewall chain should you use to filter ICMP packets from the router itself?
- A. input
- B. postrouting
- C. forward
- D. output
Answer: A
NEW QUESTION # 42
Which router command allows you to view the entire contents of all access lists?
- A. show interface
- B. show access-lists
- C. show all access-lists
- D. show ip interface
Answer: B
NEW QUESTION # 43
What configuration is added by /ip Hot-Spot setup command? (select all that apply)
- A. /ip dhcp-server
- B. /ip service
- C. /queue tree
- D. /ip Hot-Spot walled-garden
- E. /ip Hot-Spot user
Answer: A,E
NEW QUESTION # 44
When using routing option 'check-gateway=ping' after how many timeouts is gateway considered unreachable:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 45
Which protocol does Ping use?
- A. ICMP
- B. BootP
- C. ARP
- D. TCP
Answer: A
NEW QUESTION # 46
Netinstall can be used to
- A. Reinstall software without losing licence
- B. Install package for different hardware architecture
- C. Keep configuration, but reset a lost admin password
- D. Install different software version (upgrade or downgrade)
Answer: A,C,D
NEW QUESTION # 47
What letters appear next to a route, which is automatically created by RouterOS when user adds a valid address to an active interface?
- A. D
- B. I
- C. S
- D. A
- E. C
Answer: A,D,E
NEW QUESTION # 48
Which of the following are layers in the TCP/IP model?
Application
Session
Transport
Internet
Data Link
Physical
- A. 1 and 2
- B. 2, 3 and 5
- C. 1, 3 and 4
- D. 3, 4 and 5
Answer: C
NEW QUESTION # 49
MikroTik RouterOS is sending logs to an external syslog server. Which protocol and port is used by RouterOS for sending logs (by default)?
- A. TCP 110
- B. UDP 113
- C. UDP 514
- D. UDP 21
Answer: C
NEW QUESTION # 50
What kind of users are listed in the "/user" menu?
- A. Hot-Spot users
- B. pptp users
- C. router users
- D. wireless users
Answer: C
NEW QUESTION # 51
Which is the default port of IP-Winbox?
- A. TCP 8291
- B. TCP 80
- C. TCP 8192
- D. UDP 8291
Answer: A
NEW QUESTION # 52
There are two wireless cards (wlan1 and wlan2) which are bridged together. On wlan1 card there is a setting
"Forwarding=no". Choose the correct answer(s):
- A. Stations on wlan1 will be able to communicate with stations on wlan1
- B. Stations on wlan1 will be able to communicate with stations on wlan2
- C. Stations on wlan2 will be able to communicate with stations on wlan1
- D. Stations on wlan2 will be able to communicate with stations on wlan2
- E. To prevent communication between wlan1 and wlan2 one cannot use Bridge Filters
Answer: E
NEW QUESTION # 53
MAC layer by OSI model is also known as
- A. Layer 1
- B. Layer 7
- C. Layer 2
- D. Layer 3
- E. Layer 6
Answer: C
NEW QUESTION # 54
It is required to make a web server on a private LAN visible on the Public Internet. Only the web server port should be visible to the public. Which of the following configuration steps must be met. (select all that apply)
- A. Connection Tracking must be enabled on NAT router
- B. in ip firewall NAT there should be a dst-nat between the public ip of the router and the private ip of the webserver
- C. A route between the NAT Router and the webserver must exist
- D. LAN address of the webserver should be routable on the internet
- E. Public IP address of the webserver must be installed on the NAT Router
Answer: B,C
NEW QUESTION # 55
In the Route List, the identification DAb for a route stands for
- A. dynamic - active - backup
- B. direct - acknowledge - backup
- C. dynamic - active - bgp
- D. direct - active - bgp
Answer: C
NEW QUESTION # 56
Mangle Routing (routing-mark) is possible, by using chains:
- A. input and output
- B. forward and postrouting
- C. forward and output
- D. prerouting and forward
- E. prerouting and output
Answer: C
NEW QUESTION # 57
......
MTCNA Actual Questions Answers PDF 100% Cover Real Exam Questions: https://dumpstorrent.dumpsfree.com/MTCNA-valid-exam.html